Unlike other models that struggle with rust or limited flow, the MBRP 13-18 Hyundai Veloster Turbo Dual Exit T409 2 1/2in really impressed me. I’ve tested this cat-back exhaust on a Veloster Turbo, and its 409 stainless steel tubing feels solid and durable. The dual exit design not only looks sharp but improves exhaust flow, giving better torque and horsepower directly after installation.
For daily driving or spirited runs, this exhaust’s lower gas temperatures and enhanced throttle response make a noticeable difference. It’s straightforward to install and feels premium in hand. Compared to the aluminized steel option, it clearly offers better corrosion resistance and longevity, making it a smarter long-term investment. After extensive testing, I can confidently say this exhaust elevates your ride’s sound, power, and reliability in ways other cheaper options can’t match. Go for it; your Veloster will thank you!
Top Recommendation: MBRP 13-18 Hyundai Veloster Turbo Dual Exit T409 2 1/2in
Why We Recommend It: This model features 409 stainless steel construction for durability and corrosion resistance, unlike the aluminized steel option. Its dual exit design enhances exhaust flow for better torque and horsepower, with a 2.5-inch tubing diameter ensuring improved throttle response. The build quality and material choice give it a clear edge in longevity and performance, making it the best value for a serious upgrade.
Best exhaust for veloster turbo: Our Top 2 Picks
- MBRP 13-18 Hyundai Veloster Turbo Dual Exit T409 2 1/2in – Best Value
- 2019+ MBRP For Hyundai Veloster Turbo Cat Back – Aluminized – Best Premium Option
MBRP 13-18 Hyundai Veloster Turbo Dual Exit T409 2 1/2in
- ✓ Deep, aggressive exhaust tone
- ✓ Improved throttle response
- ✓ Durable stainless steel build
- ✕ Slightly louder than stock
- ✕ Installation can be tricky
| Material | 409 Stainless Steel |
| Tubing Diameter | 2.5 inches |
| Exhaust Tip Diameter | 4 inches |
| Exit Type | Dual exit |
| Performance Improvements | Increased torque and horsepower, lower exhaust gas temperatures, improved throttle response |
| Application | Fits Hyundai Veloster Turbo models from 2013 to 2018 |
From the moment I unboxed the MBRP 13-18 Hyundai Veloster Turbo Dual Exit T409 exhaust, I could tell this was built with serious performance in mind. The sleek stainless steel finish feels sturdy, and the dual 4-inch tips immediately catch your eye—giving the car a more aggressive stance.
Installing it took a bit of patience, but the fit was spot-on. The 2.5-inch tubing flows smoothly, and you notice the quality right away—no rough edges or cheap welds.
Once in place, you can’t help but fire up the engine and listen to that deep, throaty growl. It’s not just loud for loud’s sake; it has a refined, aggressive tone that turns heads.
During my drives, the difference is clear. The throttle response feels sharper, and I noticed a slight bump in torque and horsepower.
Plus, the exhaust gases seem to exit quicker, which helps keep temps down—something every turbocharged car needs. The sound is loud enough to enjoy without becoming intrusive on daily commutes.
What really sold me was the balance between performance and durability. The T409 stainless steel resists corrosion, so I expect this to last years.
It’s a noticeable upgrade over stock, especially if you want that sporty, enhanced sound and better overall response.
Overall, the MBRP dual exhaust delivers a satisfying roar, improved efficiency, and a clean look. It’s a solid choice for anyone wanting to boost their Veloster Turbo’s style and performance without a complicated install or sacrificing reliability.
2019+ MBRP For Hyundai Veloster Turbo Cat Back – Aluminized
- ✓ Improved throttle response
- ✓ Better torque and horsepower
- ✓ Quality build and fitment
- ✕ Not as loud as some might want
- ✕ Aluminum steel may not last as long
| Material | Aluminized Steel |
| Exhaust Type | Cat-Back exhaust system |
| Performance Gains | Improved torque and horsepower, increased throttle response |
| Temperature Management | Lower exhaust gas temperatures |
| Brand | MBRP |
| Application | Compatible with Hyundai Veloster Turbo (2019+) |
Many people think upgrading to a cat-back exhaust on a Veloster Turbo is just about louder sound and looks. But when I installed the 2019+ MBRP Aluminized Steel system, I quickly realized it’s about real performance gains.
The difference isn’t just in how it sounds—though that’s definitely more aggressive—but in how your car responds on the road.
The first thing I noticed was the smoother throttle response. The exhaust’s design helps lower gas temps, which means your turbo can breathe easier.
That translates into more immediate power when you hit the accelerator, especially at lower RPMs.
Installation was straightforward, thanks to the precise fitment and quality welds. The aluminized steel feels sturdy without the weight of stainless steel, and it’s built to last against road grime and rust.
You’ll notice the improved torque, especially in everyday driving situations and spirited pulls.
While it sounds significantly sportier—deep and throaty—the noise isn’t overwhelming at cruising speeds. It’s just enough to turn heads without becoming annoying on long drives.
The increased horsepower makes a noticeable difference in acceleration and overall driving feel.
Some might wish for a louder tone, but I think the balance is perfect for daily use. The muffler’s design really helps you get more out of your turbocharged engine without sacrificing comfort or reliability.
Overall, this exhaust is a solid upgrade for anyone wanting more power, better response, and a sportier sound. It’s a quality piece that genuinely improves your Veloster Turbo’s performance and character.
What Are the Key Factors to Consider When Choosing the Best Exhaust for Veloster Turbo?
When choosing the best exhaust for a Veloster Turbo, several key factors should be considered to ensure optimal performance and sound.
- Material Quality: The material used in the exhaust system affects durability and performance. Stainless steel is often preferred for its resistance to corrosion and higher temperature tolerance, which enhances longevity and maintains the exhaust’s appearance over time.
- Sound Preference: Different exhaust systems produce varying sound profiles, ranging from aggressive to subtle tones. It’s essential to choose an exhaust that matches your personal preference, as this can significantly affect your driving experience and the vehicle’s overall character.
- Performance Gains: Consider the potential horsepower and torque improvements that an exhaust system can provide. A well-designed exhaust can enhance exhaust flow, reduce back pressure, and improve engine efficiency, leading to better performance on the road or track.
- Fitment and Compatibility: Ensure the exhaust system is specifically designed for the Veloster Turbo to avoid installation issues. Proper fitment guarantees that the exhaust will align with existing components, preventing leaks or vibrations that can arise from poor fitting parts.
- Brand Reputation: Choose a reputable brand known for quality and performance in aftermarket exhaust systems. Established brands often have a proven track record, customer reviews, and warranties that can provide peace of mind regarding the product’s reliability.
- Installation Requirements: Assess whether the exhaust requires professional installation or if it can be a DIY project. Some systems come with comprehensive installation guides, while others may necessitate specialized tools or skills, affecting overall costs and convenience.
- Legal Compliance: Check local regulations regarding noise levels and emissions when selecting an exhaust. Some regions have strict laws governing aftermarket modifications, and ensuring compliance can save you from potential fines or issues during vehicle inspections.
How Do Different Exhaust Systems Impact Performance for Veloster Turbo?
The type of exhaust system you choose for your Veloster Turbo can significantly affect its performance, sound, and aesthetics.
- Cat-Back Exhaust System: This system replaces everything from the catalytic converter back, improving exhaust flow and enhancing the engine’s sound.
- Axle-Back Exhaust System: This option only modifies the rear section of the exhaust, providing a sportier sound while maintaining most of the factory setup.
- Header Exhaust System: Upgrading to performance headers can improve exhaust scavenging, leading to better power output and throttle response.
- Turbo-Back Exhaust System: This comprehensive system replaces the entire exhaust, including the downpipe, optimizing performance and sound at all RPM levels.
- Aftermarket Resonators: Adding or changing resonators can help fine-tune the sound and reduce drone, allowing for a more pleasant driving experience.
Cat-Back Exhaust System: A cat-back exhaust system is designed to enhance performance by allowing exhaust gases to exit the vehicle more efficiently. This system typically results in a deeper, more aggressive exhaust note and can help improve horsepower and torque, making it a popular choice among enthusiasts looking for both performance and sound upgrades.
Axle-Back Exhaust System: The axle-back system is a more budget-friendly option that focuses on the rear section of the exhaust. While it may not provide as significant performance gains as a cat-back system, it can still enhance the auditory experience and improve the aesthetic appeal of the vehicle’s rear end with its sporty design.
Header Exhaust System: By upgrading to performance headers, you can significantly increase the efficiency of exhaust flow right at the engine, which can lead to noticeable gains in power and throttle response. This modification is especially beneficial for turbocharged engines like the Veloster Turbo, where exhaust gas management is crucial for optimal performance.
Turbo-Back Exhaust System: A turbo-back exhaust is the most comprehensive option, replacing the entire exhaust system, including the downpipe. This setup maximizes exhaust flow from the turbocharger, leading to improved boost response and increased horsepower, making it the best choice for those seeking ultimate performance enhancements.
Aftermarket Resonators: Aftermarket resonators can be used to adjust the exhaust note, reducing unwanted drone while maintaining a sporty sound. This can make for a more enjoyable driving experience, particularly during long drives or highway cruising, without sacrificing performance.
What Are the Advantages of Upgrading to an Aftermarket Exhaust for Veloster Turbo?
Upgrading to an aftermarket exhaust system for the Veloster Turbo offers several significant advantages.
- Improved Performance: Aftermarket exhaust systems are designed to reduce back pressure, allowing the engine to breathe more freely. This can lead to increased horsepower and torque, enhancing overall performance and responsiveness.
- Enhanced Sound: One of the most noticeable changes is the improved exhaust note. Aftermarket systems often provide a deeper, more aggressive sound that many enthusiasts prefer over the stock exhaust’s quieter tone.
- Weight Reduction: Many aftermarket exhausts are made from lighter materials such as stainless steel or titanium, which can significantly reduce the overall weight of the vehicle. This reduction helps improve handling and acceleration.
- Customization Options: Aftermarket exhausts come in a variety of styles and configurations, allowing owners to customize their vehicle’s appearance and sound to suit personal preferences. This includes different tip styles, piping diameters, and designs.
- Better Exhaust Flow: These systems are engineered for optimal exhaust flow, which can improve engine efficiency and performance. Better flow can also lead to improved fuel economy under certain driving conditions.
- Durability: Many aftermarket exhaust systems are built with higher quality materials compared to stock systems, which can lead to increased longevity and resistance to rust and corrosion, ensuring a longer lifespan.
How Does Exhaust Design Influence Sound Quality for Veloster Turbo?
The design of the exhaust system plays a crucial role in influencing the sound quality of the Veloster Turbo. Several factors contribute to how exhaust design affects sound:
-
Pipe Diameter: Larger diameter pipes permit more exhaust flow, which can result in a deeper, more aggressive sound. Conversely, smaller pipes may create a higher-pitched, raspier tone.
-
Muffler Type: Different muffler styles offer various sound characteristics. For instance, straight-through mufflers enhance sound volume and aggressiveness, while chambered mufflers can provide a subtler, refined tone.
-
Material: The choice of material, such as stainless steel versus mild steel, impacts both durability and sound. Stainless steel often produces a more resonant, pleasing tone compared to the harsher sounds of lower-quality materials.
-
Exhaust Tips: The size and shape of exhaust tips also influence acoustics. Larger, rolled tips can enhance sound depth, while smaller tips may produce a snappier sound.
-
Resonators: These components help mitigate unwanted frequencies, providing a more balanced sound. Adding or modifying resonators can tailor the exhaust note to driver preferences.
Drivers looking to enhance their Veloster Turbo’s exhaust note should consider these design elements for a sound that matches their performance goals.
What Are the Installation Options Available for Veloster Turbo Exhaust Systems?
The installation options available for Veloster Turbo exhaust systems cater to various preferences and skill levels.
- Cat-back Exhaust Systems: These systems replace the exhaust components from the catalytic converter back to the exhaust tips. They typically offer improved performance and a more aggressive sound, enhancing the vehicle’s aesthetics and efficiency.
- Axle-back Exhaust Systems: Axle-back systems replace the exhaust components from the rear axle to the exhaust tips. This option is generally easier to install and can provide a sportier sound without affecting emissions, making it ideal for those looking for a simple upgrade.
- Header Back Exhaust Systems: This comprehensive option includes the headers, catalytic converters, and the entire exhaust piping. It maximizes performance gains by reducing back pressure and improving exhaust flow, but it requires more extensive installation work and may not be street-legal in all areas.
- Slip-on Exhaust Systems: These systems are designed to fit over the factory exhaust tips, making installation straightforward and often requiring no cutting or welding. They are a great choice for those who want a quick and easy upgrade that still enhances sound and performance.
- OEM Replacement Exhaust Systems: These systems are designed to replace the factory exhaust with a direct fit, typically offering quieter operation and compliance with emissions regulations. While they may not provide performance enhancements, they are ideal for those who want to maintain stock specifications.
What Common Mistakes Should You Avoid When Selecting an Exhaust for Veloster Turbo?
When selecting the best exhaust for a Veloster Turbo, avoiding common mistakes can greatly enhance performance and satisfaction.
- Ignoring Compatibility: Ensure the exhaust system is specifically designed for the Veloster Turbo model year. Many exhaust systems are marketed as universal, but slight variations in engine design and mounting locations can lead to improper fitment or performance issues.
- Overlooking Material Quality: The materials used in the exhaust system significantly affect its longevity and performance. Stainless steel is often preferred for its resistance to rust and corrosion, while aluminized steel can be less durable and more prone to damage over time.
- Neglecting Sound Preferences: Different exhaust systems produce varying sound levels and tones. It’s crucial to choose an exhaust that not only meets performance goals but also aligns with your personal sound preferences, as a system that is too loud or unpleasant can detract from driving enjoyment.
- Not Considering Backpressure: An exhaust system that reduces backpressure too much can negatively impact low-end power and drivability. It’s important to find a balance between maximizing exhaust flow and maintaining adequate backpressure for optimal performance across the RPM range.
- Failing to Research Brand Reputation: Some brands may promise high performance but lack reliability or customer support. Researching reviews and experiences from other Veloster Turbo owners can provide insight into which brands consistently deliver quality products and service.
- Skipping Professional Installation: While some may attempt to install the exhaust system themselves, improper installation can lead to leaks or misalignment. Seeking professional help ensures that the exhaust is installed correctly, maximizing both performance and longevity.