honda accord bolt pattern

Honda accord bolt pattern – Lug bolt pattern

If you’re reading this, you’re presumably looking for “honda accord bolt pattern.” You are in for a treat! You will notice a range of possibilities to pick from below. In order to provide you with the most accurate response possible, I have attempted to detail the most common bolt designs, sizes, and offsets for honda accord you should consider. Honda accord bolt pattern is 5×114.3.

Honda accord Bolt Pattern fitment information

2019 honda accord bolt pattern

  • Honda accord bolt pattern – PCD 5×114.3
  • Stock wheel offset – 32 to 50 mm
  • Center bore – 64.1 mm
  • Thread size – M12 x 1.5
  • Stock rim size ranges – 17×6.5 – 20×9.5
  • Tire sizes – 225/50 R17, 235/45 R18, 235/40 R19

2018 honda accord bolt pattern

  • Honda accord bolt pattern – PCD 5×114.3
  • Stock wheel offset – 32 to 50 mm
  • Center bore – 64.1 mm
  • Thread size – M12 x 1.5
  • Stock rim size ranges – 17×6.5 – 20×9.5
  • Tire sizes – 225/50 R17, 235/45 R18, 235/40 R19

2015 honda accord bolt pattern

  • Honda accord bolt pattern – PCD 5×114.3
  • Stock wheel offset – 35 to 54 mm
  • Center bore – 64.1 mm
  • Thread size – M12 x 1.5
  • Stock rim size ranges – 16×6.5 – 20×8.5
  • Custom rim size ranges – 18×10.0 – 26×9.5
  • Tire sizes – 205/70 R15, 205/65 R16, 225/55 R16, 215/55 R17, 225/50 R17, 235/45 R18, 235/40 R19, 245/30 R20, 245/35 R20

2014 honda accord bolt pattern

  • Honda accord bolt pattern – PCD 5×114.3
  • Stock wheel offset – 35 to 54 mm
  • Center bore – 64.1 mm
  • Thread size – M12 x 1.5
  • Stock rim size ranges – 16×6.5 – 20×8.5
  • Custom rim size ranges – 18×10.0 – 26×9.5
  • Tire sizes – 205/70 R15, 205/65 R16, 225/55 R16, 215/55 R17, 225/50 R17, 235/45 R18, 235/40 R19, 245/30 R20, 245/35 R20

2012 honda accord bolt pattern

  • Honda accord bolt pattern – PCD 5×114.3
  • Stock wheel offset – 35 to 54 mm
  • Center bore – 64.1 mm
  • Thread size – M12 x 1.5
  • Stock rim size ranges – 16×6.5 – 20×8.5
  • Custom rim size ranges – 18×10.0 – 26×9.5
  • Tire sizes – 205/70 R15, 205/65 R16, 225/55 R16, 215/55 R17, 225/50 R17, 235/45 R18, 235/40 R19, 245/30 R20, 245/35 R20

2000 honda accord bolt pattern

  • Honda accord bolt pattern – PCD 4×114.3
  • Stock wheel offset – 35 to 45 mm
  • Custom offset range: 7 to 43 mm
  • Center bore – 64.1 mm
  • Thread size – M12 x 1.5
  • Stock rim size ranges – 15×6.0 – 18×8.0
  • Custom rim size ranges – 17×10.0 – 18×9.5
  • Tire sizes – 195/70 R14, 195/65 R15, 205/60 R15, 205/65 R15, 205/60 R16, 205/45 R17, 215/35 R19

If you want to change the honda accord tire or wheel, you’ll need to understand the honda accord bolt pattern. It cannot be overstated how critical it is to obtain your bolt pattern. The last thing you want is to change your honda accord tire or wheel and end up having to struggle to do it when the fit is not entirely correct.

Because of its price, market value, wide range of features and extensive selection of aftermarket parts, the Honda accord is a popular car among many different types of people. There are various solutions available on the market today for changing your tires or wheels on a Honda accord automobile. One of the most common is the car’s tire size bolt pattern.

Honda accord bolt pattern 5×114.3

Honda accord bolt pattern

Below, we have different models of the honda accord bolt pattern that you need to consider. But before we get into that, there are some terms that you sure need to know.

Stock Wheel Offset –

It is known as the space between the wheel center of the honda accord wheels and hub mounting surface.

Center Bore (Hub Bore) –

The center bore is the hole that you see in the middle of a rim which matches exactly with the hub diameter. You can find it at the back of the wheel.

Thread size –

It helps you to know the thread diameter, pitch, and length. The first digit of the thread diameter is described in millimeters.

Tire size –

The tire comes in different sizes, and choosing the right one will only make things suitable for the correct performance.

Read also: 

Dodge charger bolt pattern

Jeep Cherokee bolt pattern

Chrysler 300 bolt pattern

How bolt pattern is measured

If you have an even number of lugs, measure center-to-center on lugs across from each other. However, if there are an odd number of lugs, do not do so. Measure the diameter of the hole from the center of one lug to the outer edge. If you perform this diagonally across the hole, you’ll most likely obtain the greatest results.

Examine the Torque Specifications for the Bolt Pattern

Use a torque wrench to install your alloy wheels. In addition, for precise specs, reference your owner’s handbook. Following a test drive, you should double-check the torque ratings. This manner, you may successfully reduce the chance of incorrectly torqueing your lug nuts or bolts.

The vibrations and rigors of driving can quickly loosen the bolt or nut, causing a slew of avoidable issues. When installing new wheels, re-torque the wheel lugs after the first 50-100 miles of driving.

What Is the Appropriate Wheel Dimension?

Four critical parameters will assist you in determining the correct wheel size. You will find them below:

Honda Accord Rim Size

Examine the place where your tire beads are seated. Measures the exact diameter of your wheel at that specific moment.

Rim width

Rim width is measured by measuring the distance between the inside of the outer lip and the bead that sits on the inner lip. Wheel Spacers may be used to adjust the offset of your wheels.

Backspacing

Backspacing is the distance from the inside of your wheel to the inner edge of the wheel where it meets the critical pieces such as the axle flange, brake, and hub.

Bolt Pattern on a Honda Accord

The diameter of an imagined circle formed by the wheel lugs or bolt holes. How can I alter the lug pattern? Adapters should be used.

Will a 5×114 3 fit a Honda Accord?

Yes, the bolt pattern on all 7th Generation Accords (2003-2007) is 5×114.

What bolt pattern is a 2008 Honda Accord?

According to the owner’s handbook, the rim bolt pattern for the 2008 Honda accord is 5 lug 4.5 inch or 114.3mm high positive offset.

What cars use 5×114 3 bolt pattern?

Honda Civic or Accord, Renault Megane III, Kia Cee’d, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Sportage and Venga, Mitsubishi Lancer, Fiat Sedici, Mazda 3, Nissan Qashqai, Outlander and ASX, Dacia Duster, Hyundai i30 and x35 are the most popular cars with PCD 5×114 3.

What is the bolt pattern for a 2009 Honda Accord?

On the 2009 Honda Accord, the bolt pattern is 5×4.

Is 5×114 3 the same as 5×5 5?

The usual bolt pattern is 5×5 5. The bolt pattern 5×114. 3 is known as a non-standard bolt pattern.

Conclusion

It is usually a good idea to utilize the proper wheel size and bolt pattern for your honda accord. So, on this page, we provide the honda accord bolt pattern that you may use for many honda vehicles. Please keep in mind that the information provided here is current to the best of our knowledge but is subject to change.